Lumbar Support Air Cushion, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING .
-- For reinstallation, mark pneumatic lines at the separating point with a waterproof permanent marker.
-- Disconnect the pneumatic lines at the markings -arrows-. Refer to PNEUMATIC LINES, DISCONNECTING AND CONNECTING .
- Pneumatic Line to Upper Air Cushion
- Pneumatic Line to Center Air Cushion
- Pneumatic Line to Lower Air Cushion
-- Remove the clips -arrows-.
-- Free up the mount -1- with the lumbar support air cushion and remove to the side. (Shown on a removed cover and cushion.)