Suspension Strut, Removing And Installing, RS Competition: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Installation position. Refer to Figure.
-- Loosen the bolt -arrow- and insert the adjusting nut -1- all the way downward.
-- Install the shock absorber fork. Refer to SHOCK ABSORBER FORK, REMOVING AND INSTALLING .
-- Note the installation position. Refer to Installing => RS-Competition-vehicles: The nut -2- at the shock absorber -3- must be centered to the slot -arrow- in the shock absorber fork -1-. .
-- Adjustment of the spring. Refer to Owner's Manual.
After replacing the struts:
- Adjust the headlamps. Refer to HEADLAMP, ADJUSTING .
- Driver Assistance Systems Front Camera, Calibrating. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .