Suspension Strut, Removing And Installing, Excluding RS Competition: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Installation position. Refer to Figure.
-- Equipment versions with Dynamic Ride Control (DRC): fill the dynamic ride control system. Refer to DYNAMIC RIDE CONTROL (DRC), DRAINING AND FILLING .
After replacement of the shock absorbers:
- For the equipment version with electronic damping: perform the basic setting of the electronic damping function. Refer to ELECTRONIC DAMPING BASIC SETTING .
After replacing the struts:
- Adjust the headlamps. Refer to HEADLAMP, ADJUSTING .
- Driver Assistance Systems Front Camera, Calibrating. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .