Threshold "A" In Mm, Cabriolet
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the readout value is greater than the threshold "a" (table value): insufficient damping effect → replace shock absorber.
If the readout value is less than the threshold "a" (table value): sufficient damping effect → shock absorber does not need to be replaced.
| Chassis | Front Axle | Rear Axle | Note |
|---|---|---|---|
| 1BA | 48 | 49 | no load tank full |
| 1BD | 46 | 49 | |
| 1BE | 48 | 49 | |
| 1BL / 2MV | -- | -- |