Emergency Flasher Button -E229-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Tip:
There is a hole in the wide vent on both sides of the emergency flasher button.
-- Carefully guide the 4 mm hex socket wrench -3- in the hole between the wide vent slats -1- and place on the emergency flasher button -2- as shown.
-- Press the emergency flasher button out of the mount -arrow-.
-- Disconnect the connector.