Overview - Body Tail Lamps, Sedan
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Tail Lamp
- Left Tail Lamp -MX3-
- Right Tail Lamp -MX4-
- LED version: If an LED is malfunctioning, the tail lamp must be completely replaced
- Removing and installing. Refer to TAIL LAMP, REMOVING AND INSTALLING, SEDAN .
- Rear Turn Signal Bulb
- Left Rear Turn Signal Bulb -M6-
- Right Rear Turn Signal Bulb -M8-
- Bulb, Replacing. Refer to TAIL LAMP BULB HOLDER, REMOVING AND INSTALLING, SEDAN .
- Brake and Tail Lamp Bulb
- Left Brake/Tail Lamp Bulb -M21-
- Right Brake/Tail Lamp Bulb -M22-
- Bulb, Replacing. Refer to TAIL LAMP BULB HOLDER, REMOVING AND INSTALLING, SEDAN .
- Bulb Holder
- Removing and installing. Refer to TAIL LAMP BULB HOLDER, REMOVING AND INSTALLING, SEDAN .
- Bolt
- Quantity: 4
- 1.5 Nm
- Brake and Tail Lamp Bulb 2
- Left Brake/Tail Lamp Bulb 2 -M58-
- Right Brake/Tail Lamp Bulb 2 -M59-
- Bulb, Replacing. Refer to TAIL LAMP BULB HOLDER, REMOVING AND INSTALLING, SEDAN .
- Back-Up Lamp Bulb
- Left Back-Up Lamp Bulb -M16-
- Right Back-Up Lamp Bulb -M17-
- Bulb, Replacing. Refer to TAIL LAMP BULB HOLDER, REMOVING AND INSTALLING, SEDAN .
- Cover
- For the tail lamp
- Removing and installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
- Adjusting Nut
- Adjusting. Refer to BODY TAIL LAMP, ALIGNING WITH BODY CONTOUR .
- Bolt
- 4 Nm
- Adjusting Nut
- Adjusting. Refer to BODY TAIL LAMP, ALIGNING WITH BODY CONTOUR .
- Bolt
- 4 Nm