Tail Lamp, Removing And Installing, AVANT: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn the light switch to position "0".
Before Product Improvement:
-- Insert the screwdriver -3- into the opening and release the lower catch -arrow A-.
-- Grip between the cover -2- and the tail lamp -1- and release the remaining catches.
-- Remove the cover from the tail lamp -arrow B-.
Tip:
The cover must be removed very carefully so that the guide and the hooks do not get damaged.
From Product Improvement:
-- To release the catches on the cover -2-, push the cover by hand on the edge forward -arrows-.
-- Remove the cover from the tail lamp -1-.
Continuation:
-- Remove the bolts -2 and 3-.
-- Remove the tail lamp -1- from the clip nut -arrow-.
-- Disconnect the connector.