Alcohol Interlock System, Initial Operation
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Connect the Alcohol Interlock System
-- Pay attention to the manufacturers instructions when installing and connecting the control module.
-- Connect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Insert a 20 A fuse in Fuse Panel 3 - ST3- in location 5 in the left side of the luggage compartment.
Perform a Software Update
-- Connect the Vehicle Diagnostic Tester.
-- Select "flash".
-- Select "Enter SVM code".
-- Perform the software update with SVM code -46A510-.
Start the Alcohol Interlock System.
-- Perform a function test following manufacturer instructions.