Dimension Overview

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Chassis	Distance between the Center of the Wheel and the Lower Edge of the Fender/Wheel Housing
	Front Axle		Rear Axle		Tolerance between the right and left
	Specified size	Tolerance	Specified size	Tolerance	Tolerance between the right and left
1BA	368 mm	± 10 mm	366 mm	± 10 mm	Less than or equal to 10 mm
1BE	368 mm	± 10 mm	366 mm	± 10 mm	Less than or equal to 10 mm
1BD	368 mm	± 10 mm	366 mm	± 10 mm	Less than or equal to 10 mm
1BM	368 mm	± 10 mm	376 mm	± 10 mm	Less than or equal to 10 mm
1BL	368 mm	± 10 mm	366 mm	± 10 mm	Less than or equal to 10 mm
1BU / 1BH / 2MU	391 mm	± 10 mm	389 mm	± 10 mm	Less than or equal to 10 mm
2MV	368 mm	± 10 mm	366 mm	± 10 mm	Less than or equal to 10 mm
2MC / 2MS	367 mm	± 10 mm	371 mm	± 10 mm	Less than or equal to 10 mm
2MT / 1BC	386 mm	± 10 mm	384 mm	± 10 mm	Less than or equal to 10 mm
2MD	357 mm	± 10 mm	361 mm	± 10 mm	Less than or equal to 5 mm