Dimension Overview

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Chassis	Distance between the Center of the Wheel and the Lower Edge of the Fender/Wheel Housing
	Front Axle		Rear Axle		Tolerance between the right and left
	Specified size	Tolerance	Specified size	Tolerance	Tolerance between the right and left
1BA / 1BU	394 mm	± 10 mm	392 mm	± 10 mm	Less than or equal to 10 mm
1BE	371 mm	± 10 mm	369 mm	± 10 mm	Less than or equal to 10 mm
1BR	407 mm	± 10 mm	405 mm	± 10 mm	Less than or equal to 10 mm
1BB	394 mm	± 10 mm	392 mm	± 10 mm	Less than or equal to 10 mm
1BD	371 mm	± 10 mm	369 mm	± 10 mm	Less than or equal to 10 mm
1BM	394 mm	± 10 mm	405 mm	± 10 mm	Less than or equal to 10 mm
1BL	384 mm	± 10 mm	382 mm	± 10 mm	Less than or equal to 10 mm
1BQ / 2MV	371 mm	± 10 mm	369 mm	± 10 mm	Less than or equal to 10 mm
2MN / 1BP	410 mm	± 10 mm	408 mm	± 10 mm	Less than or equal to 10 mm
2MT	389 mm	± 10 mm	387 mm	± 10 mm	Less than or equal to 10 mm
2MC / 2MS	367 mm	± 10 mm	371 mm	± 10 mm	Less than or equal to 10 mm
2MD	357 mm	± 10 mm	361 mm	± 10 mm	Less than or equal to 5 mm