Wind Deflector, Removing And Installing, A4 Sedan: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the glass panel toward the rear.
-- Slightly lift the tab on the bearing -1- for the wind deflector -2- using a screwdriver -arrow A-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Push the wind deflector bearing all the way to the rear -arrow B-.
-- Pivot the wind deflector upward -arrow- and disengage it from the bearing.
 Courtesy of AUDI OF AMERICA, LLC
|