Wind Deflector Bearing, Removing And Installing, A4 Sedan: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the wind deflector. Refer to WIND DEFLECTOR, REMOVING AND INSTALLING, A4 SEDAN .
-- Push the left and right bearing -1- at the cut-out -arrow- in the sunroof frame.
-- Unclip the left and right bearing from the rail on the outside using a screwdriver.
-- Guide the left and right bearing -1- out through the cut-out in the sunroof frame -arrow-.