Wind Deflector Bearing, Removing And Installing, A4 AVANT: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the front glass panel.
-- Remove the bolt -2-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Lift the retaining tabs slightly -A arrows-.
-- Pull the wind deflector bearing -1- to the side and out of the sunroof frame -arrow B-.
-- Pivot the wind deflector bearing 90° and disengage it from the wind deflector.