Sunroof Frame, Removing And Installing, A4 Sedan: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- When inserting the sunroof frame, pay attention to the sliding sunroof seal in the roof opening.
-- Have the two people assisting bring the sunroof frame into its installation position and install the nuts -3 and 5- until they stop.
-- Align the sunroof frame with the markings made during removal.
-- Tighten the nuts in the following sequence: -1 through 6-.
Install in reverse order of removal. Note the following:
-- Perform an adaptation. Refer to Sunroof Motor -V1-, PROGRAMMING .
Tightening Specifications
- Refer to OVERVIEW - SLIDING SUNROOF, A4 SEDAN