Overview - Sunroof Shade, A4 AVANT
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Sunroof Frame
- Guide
- For sunroof shade
- Removing and Installing. Refer to SUNROOF SHADE, REMOVING AND INSTALLING .
- Perform the adaptation after installing. Refer to Sunroof Motor -V1-, PROGRAMMING .
- Bolt
- thread cutting
- Position and install by hand
- Quantity: 2
- 2.5 Nm
- Cross Bar
- Installed, depending on the version
- Pay attention to the distance of the cross bar to the sunroof shade. Refer to Installing => cross bar .
- Bolt
- Installed, depending on the version
- thread cutting
- Position and install by hand
- Quantity: 2
- 2.5 Nm
- Sunroof Shade
- Removing and Installing. Refer to SUNROOF SHADE, REMOVING AND INSTALLING .
- Perform the adaptation after installing. Refer to Sunroof Shade Motor -V260-, ADAPTING .
- Sunroof Shade Motor -V260-
- Removing and Installing. Refer to Sunroof Shade Motor -V260-, REMOVING AND INSTALLING, A4 AVANT .
- Perform the adaptation after installing. Refer to Sunroof Shade Motor -V260-, ADAPTING .
- Bolt
- Quantity: 2
- 3 Nm