Latch Release Cable, Removing And Installing, RHD, (Not For North AMERICA): Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Engage the release cable nipple -4- in the roller of the coupling -1- and push the release cable -2- in the support bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Position the housing cover -3- so that the printed "line" -arrow- points toward the free coupling connection.

-- To release the latches evenly, adjust the release cable at the thumbwheel.

Install in the reverse order of removal while noting the following:

-- Engage the release cable nipple -4- in the roller of the coupling -1- and push the release cable -2- in the support bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Position the housing cover -3- so that the printed "line" -arrow- points toward the free coupling connection.

-- To release the latches evenly, adjust the release cable at the thumbwheel.