Latch Release Cable, Removing And Installing, LHD: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Engage the release cable nipple -3- into the coupling roller -2- and push the release cable into the support bracket.
-- Position the housing cover -1- so that the printed line points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.
Install in the reverse order of removal while noting the following:
-- Engage the release cable nipple -3- into the coupling roller -2- and push the release cable into the support bracket.
-- Position the housing cover -1- so that the printed line points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.