Height, Adjusting Using Spring Element

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Adjustment dimensions. Refer to ADJUSTMENT DIMENSIONS .

Special tools and workshop equipment required

Gauge - Gap Adjustment:3371

Fig 1: Gap Adjustment Gauge (3371)
Courtesy of AUDI OF AMERICA, LLC

Procedure

Front bumper installed.
The spring element -5- must be tensioned.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolt -4- using a screwdriver -3-.

-- Adjust the distance between the radiator grille -1- and the hood -2-.

-- Tighten the bolt.

Tightening Specifications

Refer to OVERVIEW - LOCK CARRIER