Rear Fender Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Version 1: release the retainer -arrow A- and remove the stop buffer -1- from the threaded pin -arrow B-.
-- Version 2: remove the nut -1- and remove the stop buffer -2-.
-- If equipped, remove the large cover for the fender. Refer to FENDER FRONT COVER, REMOVING AND INSTALLING, LARGE VERSION .
-- Release the retainers -2- -arrow- and remove the rear cover -1- upward.