Plenum Chamber Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the windshield wiper arms. Refer to WINDSHIELD WIPER ARMS, REMOVING AND INSTALLING .
-- Carefully remove the drip rail -1- in the area of the plenum chamber cover upward -arrow-.
-- Remove the seal -1-.
-- Coat the transition between the windshield -2- and the plenum chamber cover -5- with some soapy water. Starting at the window edge, carefully remove the plenum chamber cover vertically upward from the retainer on the windshield.
-- Remove the plenum chamber cover -5- by carefully removing the plenum chamber cover tab -4- in the -direction of the arrow- from the windshield mount -3-.