Overview - Windshield Wiper System, Rain/Light Recognition Sensor
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Silicone Pad
- Always replace after removing
- Retaining Plate
- For the Rain/Light Recognition Sensor -G397-
- Attached to the windshield
- Clip
- Rain/Light Recognition Sensor -G397-
- Equipped on some models: with Sunlight Photo Sensor -G107- and Humidity Sensor -G355-
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and installing. Refer to Rain/Light Recognition Sensor -G397-, REMOVING AND INSTALLING .
- Replacing. Refer to Rain/Light Recognition Sensor -G397-, REPLACING .