LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Windshield Washer Fluid Level Sensor, Removing And Installing >> Removing

Windshield Washer Fluid Level Sensor, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
GWWA92-10399Courtesy of AUDI OF AMERICA, LLC

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

-- Remove the windshield washer fluid level sensor -3- from the windshield washer fluid reservoir.