Terminal 30 Wire Junction 2 -TV22-: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the ground cable from the battery when the ignition is switched off. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the air filter housing. Refer to the appropriate service information or AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Release the retainers -arrows-.
-- Open the cover in the sequence -2 and 1-.
-- Remove the wires -1, 2 and 5- and free them up.
-- Remove the nut -4-.
-- Remove the wire junction -3- upward.