Fuse Panel, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Releasing Clips And Removing Cover From Fuse Holder

Courtesy of AUDI OF AMERICA, LLC

-- Remove relay and fuse panel 1. Refer to Relay and Fuse Panel 1 -SR1-, REMOVING AND INSTALLING, LHD .

-- Unlock the release and remove it from the fuse panel.

-- Remove the fuses from the fuse panel.

-- Open the clips -arrows- and remove the fuse panel cover.

-- Pull off retaining strip -1- for the connectors -arrow- and remove the connectors from the plug-in socket

Fig 2: Pulling Off Retaining Strip

Courtesy of AUDI OF AMERICA, LLC