Noise Insulation, Removing And Installing, Front: Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Vehicles with Parking Heater:

Fig 1: Ensure Exhaust Pipe Is Installed Correctly Inside Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

The rubber grommet -A- must rest without tension in the noise insulation -B-.
The exhaust pipe -C- must be flush with the rubber grommet or it can protrude out slightly.
The exhaust pipe opening must be perpendicular to the noise insulation and must not point in the direction of travel -arrow-.