Overview - Heat EXCHANGER For Heat Pump Operation
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- O-Ring
- Replace after removing. Refer to SEALS AND GASKETS .
- Lubricate lightly with refrigerant oil before installing
- Heat Exchanger for Heat Pump Operation
- Removing and Installing. Refer to HEATER CORE HEAT EXCHANGER, REMOVING AND INSTALLING .
- Refrigerant Receiver
- Removing and Installing. Refer to HEATER CORE HEAT EXCHANGER, REMOVING AND INSTALLING .
- Nut
- 10 Nm
- Washer
- Bracket
- Removing and Installing. Refer to HEATER CORE HEAT EXCHANGER, REMOVING AND INSTALLING .
- Boot
- Guide Sleeve
- Bolt
- 8 Nm
- Bolt
- 8 Nm