Expansion Valve, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- For all following procedures immediately seal all the open lines and connections with clean plugs from the Engine Bung Set :VAS6122 .
-- Disconnect the refrigerant lines -B and C- from the front expansion valve -D- and put aside (do not remove). Refer to REFRIGERANT LINES, REMOVING AND INSTALLING FROM EXPANSION VALVE .
-- Remove the bolts -A-.
-- Disconnect the expansion valve -B- from the refrigerant lines to the evaporator.