Right And Left Front Abs Wheel Speed Sensor -G45- / -G47-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Clean the inner surface of the hole before inserting the speed sensor.
-- Coat the speed sensor before inserting all around with Polycarbamide Grease at the same time omit the top of the sensor.
-- Insert the speed sensor all the way by hand and tighten.