Coolant Shut-Off Valve -N82-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hose Clamps - Up To 25mm :3094 (or commercially available hose pinch-off pliers)
- Hose Clip Pliers :VAS6340
- Hose Clip Pliers :VAS6362
The Coolant Shut-Off Valve -N82- -A- is currently only installed in vehicles with certain engines in the right plenum chamber (currently installed, for example on vehicles with a 1.8L and 2.0L TFSI engine). Refer to CONNECTION DIAGRAM - COOLANT HOSES ).