LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Final Drive, Differential (Servicing - 7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DK, 0DN, 0DP, 0HL)) >> 39 Final Drive, Differential >> Seals >> Transmission Output Shaft Seal, Replacing >> Removing

Transmission Output Shaft Seal, Replacing: Removing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driveshaft. Refer to DRIVESHAFT, REMOVING AND INSTALLING .

-- Remove the all-wheel drive clutch. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .

-- Pry out the output shaft seal using the Puller - Crankshaft/Power Steering Seal:T20143/2  .

scientia non olet · About LEMON Manuals