LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Final Drive, Differential (Servicing - 7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DK, 0DN, 0DP, 0HL)) >> 39 Final Drive, Differential >> All Wheel Drive Clutch >> All-Wheel Drive Clutch, Removing And Installing >> Installing

All-Wheel Drive Clutch, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Check the O-ring -1- on the all-wheel drive clutch input shaft -2- for damage and if necessary replace.

-- Apply a thin layer of Sealing Grease on the splines of the all-wheel drive clutch input shaft.

-- Place the all-wheel drive clutch -1- on the transmission and tighten the bolts -arrows- hand-tight.

-- Tighten the bolts -arrows- diagonally to the tightening specification.

scientia non olet · About LEMON Manuals