Overview - Dual Clutch
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Slave Cylinder with Piston
- Can only be replaced together with the dual clutch
- Engaging Bearing
- Can only be replaced together with the dual clutch
- Dual Clutch
- Engaging Bearing
- Can only be replaced together with the dual clutch
- Seal
- Replace after removing
- Seal
- Replace after removing
- Piston
- Can only be replaced together with the dual clutch
- Removing and Installing. Refer to CLUTCH COVER, REPLACING .
- Bleeder Valve
- Installing. Refer to CLUTCH COVER, REPLACING .
- Clutch Cover
- Removing and Installing. Refer to DRIVE AXLE BEARING, REPLACING .
- Replacing. Refer to CLUTCH COVER, REPLACING .
- Washer
- Integrated in clutch cover
- Bearing A
- Removing and Installing. Refer to DRIVE AXLE BEARING, REPLACING .
- Circlip
- Replace after removing
- Circlip
- Replace after removing
- Shaft Seal
- Replace after removing. Refer to INPUT SHAFT SEAL, REPLACING, CLUTCH COVER .