LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2024 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Cooling System) >> 19 Cooling System >> Radiator/Radiator Fan >> Radiator Shutter, Removing And Installing >> Removing

Radiator Shutter, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

Upper radiator shutter:

GWWA19-13385Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2- (example illustration, depending on the model to the left or right side).

-- Release the retainers -arrows-, remove the upper radiator shutter toward the front and disengage upward.

Lower radiator shutter:

GWWA19-13386Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -3-.

-- Unclip the left and right air duct -2-.

-- Remove the left and right bolt -arrow-, remove the radiator shutter -1- downward.