Overview - Coolant Pipes
WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Front Coolant Pipe
- Removing and Installing. Refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING .
- Bolt
- 6 Nm
- Bolt
- 6 Nm
- Upper Coolant Pipe
- Removing and Installing. Refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .
- Bolt
- thread cutting
- In the existing threads: 8 Nm
- In the new tapping threads: 11 Nm
- Bolt
- thread cutting
- In the existing threads: 8 Nm
- In the new tapping threads: 11 Nm
- Coolant Ventilation Line
- Bolt
- thread cutting
- In the existing threads: 8 Nm
- In the new tapping threads: 11 Nm
- Bolt
- 9 Nm
Coolant pipe on transmission - tightening specification
-- Tighten the bolt -1- and nut -2- to 20 Nm.