Parking Lock Emergency Release Cable, Removing And Installing, A4/A5: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
NOTE:
To prevent the transfer of structure-borne noise, the emergency release cable -2- must not contact the parking lock lever -1-.
Because of this align the emergency release cable -2- so that at the dimension -a and b- a small distance is present.
-- Check the parking lock emergency release. Refer to EMERGENCY RELEASE FROM P .