INPUT SHAFT SEAL, REPLACING, 0DB, 0D2, 0G2, 09R "quattro ultra", 0B0 "quattro ultra": Notes

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Multiple Use :VW 391

Fig 1: Puller - Multiple Use VW391
Courtesy of AUDI OF AMERICA, LLC
Slide Hammer Set - Adapter 40 :VW 771/40 from the Slide Hammer Set :VW 771

Fig 2: Identifying Slide Hammer Set
Courtesy of AUDI OF AMERICA, LLC
Puller - Unit Injector :T10055

Fig 3: Identifying Puller T10055
Courtesy of AUDI OF AMERICA, LLC
Seal Installer - Hollow Shaft :T10380

Fig 4: Identifying Thrust Piece - T10380-
Courtesy of AUDI OF AMERICA, LLC
-2- Puller - Unit Injector - Adapter 2 :T10055/2
Guide Sleeve :T40222/1

Fig 5: Assembly Tool T40222
Courtesy of AUDI OF AMERICA, LLC
Inductive Heater :VAS 6414

Fig 6: Identifying Inductive Heater VAS 6414
Courtesy of AUDI OF AMERICA, LLC
or
Commercially Available Hotplate with Digital Thermometer :VAS 6519

Fig 7: Identifying Digital Thermometer VAS 6519
Courtesy of AUDI OF AMERICA, LLC
Used Oil Collection and Extraction Unit :SMN372500

Fig 8: Identifying Used Oil Collection And Extraction Unit
Courtesy of AUDI OF AMERICA, LLC
Sealing Grease :G 052 128 A1
Two M 8 x 30 Bolts