INPUT SHAFT SEAL, REPLACING, 0D3 "quattro sport": Notes

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Multiple Use :VW 391

Fig 1: Puller - Multiple Use VW391
Courtesy of AUDI OF AMERICA, LLC
Puller - Unit Injector :T10055

Fig 2: Identifying Puller T10055
Courtesy of AUDI OF AMERICA, LLC
-2- Puller - Unit Injector - Adapter 2 :T10055/2
Two M 8 x 30 Bolts
Seal Installer - Hollow Shaft :T10380

Fig 3: Identifying Thrust Piece - T10380-
Courtesy of AUDI OF AMERICA, LLC
Seal Installer - Input Shaft :T40222

Fig 4: Assembly Tool T40222
Courtesy of AUDI OF AMERICA, LLC
Guide Sleeve :T40222/1
Sealing Grease :G 052 128 A1
Inductive Heater :VAS 6414

Fig 5: Identifying Inductive Heater VAS 6414
Courtesy of AUDI OF AMERICA, LLC
or
Commercially Available Hotplate and Digital Thermometer :VAS 6519

Fig 6: Identifying Digital Thermometer VAS 6519
Courtesy of AUDI OF AMERICA, LLC