Gear Oil Level, Checking, 0DB, 0D2 And 0G1 / 0G2
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Drip Tray
-- Remove the oil filler plug -arrow A- to check the gear oil.
The oil level is correct when the rear final drive is filled up to the lower edge of the oil fill hole.
- Transmission fluid specification. Refer to CAPACITIES .
-- Install the plug -arrow A- and tighten it. Tightening specification Refer to COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS, 0DB, 0D2 AND 0G1 / 0G2 .