Bumper Cover Trim, Removing And Installing, S5 From Product Improvement: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Equipment version: remove the Power Rear Lid Opening Control Module -J938- -item 2-. Refer to Power Rear Lid Opening Control Module -J938-, REMOVING AND INSTALLING, VERSION 2 .
-- Free up the wiring harness -4-.
-- Remove the bolts -arrows-.
-- Release the catch -1- and remove the mount -3- from the bumper cover.