Overview - Bumper Carrier, RS 4 And RS 5
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Replace after removing
- Quantity: 6
- Tightening specification Refer to Figure.
- Foam Seal
- Left
- Bracket
- For central valve
- Left
- Bolt
- Quantity: 3
- Tightening specification. Refer to OVERVIEW - CENTRAL VALVE .
- Central Valve
- Left
- Overview. Refer to OVERVIEW - CENTRAL VALVE .
- Nut
- Tightening specification Refer to Figure.
- Central Valve
- Right
- Overview. Refer to OVERVIEW - CENTRAL VALVE .
- Bolt
- Quantity: 3
- Tightening specification. Refer to OVERVIEW - CENTRAL VALVE .
- Bracket
- Right
- For central valve
- Foam Seal
- Right
- Bumper Carrier
- Removing and Installing. Refer to BUMPER CARRIER, REMOVING AND INSTALLING, VEHICLES WITHOUT TRAILER HITCH .