Overview - Bumper Cover, A4 Before Product Improvement From My 2019

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Bumper Cover With Components (A4 Before Product Improvement From MY 2019)

Courtesy of AUDI OF AMERICA, LLC

End Panel
- The bumper cover
- Overview. Refer to Overview - Covers and Air Guides .
Bolt
- Tightening specification Overview - Covers and Air Guides .
Towing Eye Cover
Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Adjusting. Refer to BUMPER COVER, ADJUSTING .
- Overview - Rear Reflector. Refer to OVERVIEW - REAR REFLECTOR
Bolt
- Quantity: 4
- 2 Nm
Air Intake Grille
- Center
- Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A4 BEFORE PRODUCT IMPROVEMENT THROUGH MY 2019 .
Radiator Grille
- Overview. Refer to OVERVIEW - RADIATOR GRILLE .
Lock Carrier Cover
- Overview. Refer to Overview - Covers and Air Guides .
Mount
- For the bumper cover
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
Bolt
- 4 Nm
Nut
- Quantity: 2
- 4 Nm
Bolt
- Quantity: 3
- 2 Nm
Air Duct
- Side
- Removing and Installing. Refer to AIR ROUTING, REMOVING AND INSTALLING, A4 .
Expanding Rivet
Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
Air Intake Grille
- Side
- Overview. Refer to Overview - Covers and Air Guides .
Bolt
- Tightening specification Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .