Overview - Bumper Cover, A4 ALLROAD From Product Improvement

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Bumper Cover (A4 Allroad From Product Improvement)

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specification Overview - Covers and Air Guides .
Bolt
- Tightening specification Overview - Covers and Air Guides .
End Panel
- The bumper cover
- Overview. Refer to Overview - Covers and Air Guides .
Impact Guard - Lower Section
- Removing and Installing. Refer to IMPACT GUARD LOWER SECTION, REMOVING AND INSTALLING, A4 ALLROAD FROM PRODUCT IMPROVEMENT .
Impact Guard - Upper Section
- Removing and Installing. Refer to IMPACT GUARD UPPER SECTION, REMOVING AND INSTALLING, A4 ALLROAD FROM PRODUCT IMPROVEMENT .
Towing Eye Cover
Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Adjusting. Refer to BUMPER COVER, ADJUSTING .
Air Intake Grille
- Center
- Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A4 ALLROAD BEFORE PRODUCT IMPROVEMENT .
Radiator Grille
- Overview. Refer to OVERVIEW - RADIATOR GRILLE .
Lock Carrier Cover
- Overview. Refer to Overview - Covers and Air Guides .
Bolt
- Quantity: 2
- Tightening specification Refer to OVERVIEW - RADIATOR GRILLE, A4 FROM PRODUCT IMPROVEMENT .
Bolt
- Quantity: 7
- 2 Nm
Bolt
- 4 Nm
Mount
- For the bumper cover
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
Nut
- Quantity: 2
- 4 Nm
Bolt
- Quantity: 2
- 2 Nm
Air Duct
- Side
- Removing and Installing. Refer to AIR DUCT, REMOVING AND INSTALLING, A4 ALLROAD FROM PRODUCT IMPROVEMENT .
Expanding Rivet
Spoiler
- Removing and Installing. Refer to SIDE SPOILER, REMOVING AND INSTALLING .
Trim Molding
- Removing and Installing. Refer to SIDE TRIM MOLDING, REMOVING AND INSTALLING .
Air Intake Grille
- Side
- Overview. Refer to Overview - Covers and Air Guides .
Trim
- Only for equipment versions without Control Module for Adaptive Cruise Control -J428-
- Clipped in the bumper cover.