Bumper Cover End Plate, Removing And Installing, A4: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bolts -arrows- from the front bumper cover end plate -1-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- If equipped, push the front bumper cover end plate -1- downward as far as possible and free up the wiring harness -2- -arrows-.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Release the catch -1- and remove the bumper cover end plate -2- toward the rear.
 Courtesy of AUDI OF AMERICA, LLC
|