Brake Shield, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Clean the contact surfaces on the brake shield and wheel hub.
-- Position the brake shield.
-- Install the bolts -arrows- on the brake shield and tighten them.
-- Install the brake rotor. Refer to BRAKE ROTOR, REMOVING AND INSTALLING .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.
-- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.