Left Parking Brake Motor -V282- /Right Parking Brake Motor -V283-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
-- Release the parking brake.
-- Switch off the ignition.
-- Remove the rear wheel. Refer to WHEELS AND TIRES .
-- Disconnect the connector -3- for the parking brake motor.
-- Open the clip -2- and free up the brake pad wear indicator wire.
-- Remove the bolts -arrows-.
-- Remove the parking brake motor -1- from the brake caliper.
-- Remove the seal.