Brake Pedal, Removing And Installing, LHD: Installing
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the mounting pin -3- from the left all the way and secure using the clip -2- and bolt -arrow-.
-- Connect the brake pedal -1- to the brake booster. Refer to BRAKE PEDAL, ATTACHING TO BRAKE BOOSTER .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.