Tire Pressure Monitoring System, Storing Changed Tire Pressure Values
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
During each inspection (after check or adjustment of tire pressures) or after a wheel is changed, the Tire Pressure Monitoring System must be initialized.
Requirements:
- Before storing, the driving tire pressures must be correctly adjusted.
Procedure :
-- Turn on the ignition and activate the MMI.
-- Press the MENU function button.
-- Select >>vehicle<<.
-- Select the left control button and follow the following menu structure.
- Service & Checking
- Tire Pressure Monitoring System
- Tire Pressure, Storing
- yes, save now
-- Activate the storing of tire pressures using the MMI control knob.