REDUCING AGENT (ADBLUE®), FILLING USING AdBlue® Filling System:VAS 6960

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

AdBlue® Filling System :VAS 6960

Fig 1: AdBlue® Filling System VAS6960
Courtesy of AUDI OF AMERICA, LLC

Procedure :

-- Open the fuel filler door and remove the cap for the reducing agent tank.

-- Using a lint-free cotton cloth soaked in water, clean the filler neck for the reducing agent.

-- Guide the nozzle on the AdBlue® Filling System :VAS 6960 into the reducing agent tank filler neck.

-- Operate the nozzle and completely fill the reducing agent.

-- Remove the nozzle from the reducing agent tank filler neck.

-- Use a lint-free cotton cloth soaked in water to clean the reducing agent tank filler neck and cap.

-- Attach the cap for the reducing agent tank.

NOTE:

Observe the Owner's Manual for the AdBlue® Filling System :VAS 6960 .

The nozzle for the AdBlue® Filling System :VAS 6960 switches off automatically when the maximum fill level is reached.