Instrument Cluster, Checking Indicator Lamps

WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Reading out the DTC memory is a repair procedure and should be charged separately.

Procedure :

-- Start the engine and wait for the vehicle function test to end.

-- Check if the indicator lamps in the instrument cluster turn on.

-- Check the error messages in the driver information system (DSI).

-- Turn off the engine.

-- For the relevant indicator lamps, read out the DTC memory. Refer to DTC MEMORY, CHECKING .

NOTE:

The duration of the vehicle function test depends on the model and vehicle equipment.