Engine, Transmission, Final Drive And Steering, Checking For Leaks And Damage
WARNING: This page is about a different car, the 2024 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Remove the noise insulation at every inspection.
Removal Procedures :
-- Remove the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
Procedure :
-- Check the engine and its attachments from below for leaks and damage.
-- Check the belt drive in the visible area for damage.
-- Check the radiator and coolant circuit for leaks and damage.
-- Check the refrigerant circuit consisting of the A/C compressor, condenser and refrigerant lines, including the connections, for damage.
-- Check the transmission, final drive and steering for leaks and damage.
-- If there are defects, repair or replace the respective component.